top of page

Deciduous

01. Trident Maple

This maple was acquired in the fall of 2018 from my good friend Judy Barto. It was originally grown from a cutting taken from a tree that was imported from Japan. It was field grown for many years until it was dug up and subsequently developed in large plastic tubs. Don Blackmond and later Judy, both did great work in setting this tree for future success as a bonsai. Since it came to the garden in 2018, I have continued to further develop, improve and refine this massive trident.

 

This maple stands 27" tall from the edge of the container with a root spread of 15" above soil. Taiwanese pot hand crafted and painted by Xing Rong Yi. 

Please click on the image to enlarge and obtain further information about this tree.

02. Linden

Linden (Tilia Cordata) is native to and widespread throughout much of Europe. This tree came originally from Randy Knight. Jason Gamby did much of the initial work with Walter Pall. In 2010 it came under the care of Ryan Neil who further developed it and eventually featured it in two of Mirai's live streams. In 2018 I purchased the tree and is now part of the M5 Bonsai Works permanent collection. 

This tilia has a massive trunk with exceptional bark quality that contrast beautifully with the winter wine red buds. Extremely hardy and durable species that endures well the hardships of winter. The heart-shaped leaves attain a clear canary yellow in autumn. 

 

This tree stands 22" from soil level. Container is by Horst Heinzlreiter, Germany.

Please click on the image to enlarge and obtain further information about this tree.

Arakawa maples are a classic bonsai subject. Their beautifully textured bark with their brilliant spring and autumn color makes this variety an exceptional choice. I have been working with this tree for several years now, slowly building a well ramified canopy and continuously improving the nebari through a series of root grafts. Arakawa are quite resistant to leaf burn and stand up well even after spending a whole season under the hot sun. This particular specimen is unusual in the fact that its spring leaves are red in contrast to most arakawa maples that are green. This tree has appeared in International Bonsai Magazine issue# 3, 2020. 

This tree stands 26" tall from soil level. Container is by Koyo, Japan.  

 

Please click on the image to enlarge and obtain further information about this tree.

03. Japanese Maple 'Arakawa'
04. Japanese Maple Kashima

This kashima maple was originally purchased from Suthin Sukolsovisit who had imported the tree from Japan many years ago. Kashima fall under the yatsubusa group of maples with beautiful small leaves that have a distinctive orange cast in spring. Due to an overwintering mishap, the tree suffered greatly and most of it died back in early spring 2011. Since then, I have been rebuilding the entire tree with a new and more compact canopy. Kashima maples are basally dominant so one must keep lower areas in check to prevent the apex from weakening.

This maple is 16" tall from soil level. Container is by Yamafusa, Japan.

Please click on the image to enlarge and obtain further information about this tree.

Sharp's Pygmy maples are considered to be a dwarf cultivar and as such they produce small leaves and short internodes making it an ideal subject for bonsai. The leaves are deeply incised that are a bright chartreuse green in early spring giving way to an intense red and orange color in the fall. 

 

This tree was honored with the "FINEST DECIDUOUS BONSAI" award at the 4th US National Bonsai Exhibition in 2014. It was also featured in Bonsai Focus magazine #138/161. In addition, Bonsai Bark did a write-up with a link to a 360 seasonal transformation movie I made in collaboration with Maximiliano Barros: "Spinning through the Seasons".

It stands 28" from soil level. Container is by Reiho, Japan.

Please click on the image to enlarge and obtain further information about this tree.

 

 

 

05. Japanese Maple Sharp's Pygmy

06. Japanese Maple 

I obtained this tree as a piece of well developed stock from Karen Proctor in Rochester, NY back in 2009. Eventually I sought to improve the overall design by air layering one of its lower branches and then grafted it at the base to create a twin trunk bonsai. I have also improved the nebari with root grafts with perhaps more to come in the future. This tree was featured in an article in International Bonsai Magazine 2015 issue#2 with a detailed account of how it was created. 

This bonsai is 30" high from soil level. The container is by Mazan, Japan.

Please click on the image to enlarge and obtain further information about this tree.

07. Japanese Maple 'Kiyohime'

This maple was acquired from Suthin Sukosolvisit in 2007. It was originally created as an informal upright shohin bonsai. In late winter of 2014 the tree suffered extensive dieback due to an overwintering error with only the main branch surviving the incident. It was then decided to turn it into a cascade style bonsai in an effort to salvage what was left of it. Last year it was yet again re-envisioned as a root-over-rock design. 

This maple stands 12" high from soil level. Container is by Michael Murphy, USA.

Please click on the image to enlarge and obtain further information about this tree.

08. Japanese Beech Forest

Originally imported from Japan, this Japanese white beech forest eventually became part of the famous Kennett Collection in Kennett, PA. I purchased this bonsai at the highly anticipated Kennett Collection sale event that was held at the Gateway Garden Center in Delaware. Originally what was intended to be the back of the forest I used as the new front. The trees have a beautiful white bark that is striking specially in winter. It was accepted and shown at the 6th US National on September 2016. A few months later, on December 2016, this tree was honored with the "BEST IN SHOW" award at the Winter Silhouette Bonsai Expo in Kannapolis, NC. 

This bonsai stands 26" tall from the base of the trees with a 36" wide canopy. Planted in a granite slab. 

Please click on the image to enlarge and obtain further information about this tree.

09. European Copper Beech

This tree was originally created by Bill Valavanis. Many years later, it was acquired in a trade with my good friend and talented bonsai practitioner Judy Barto. European beech (Fagus sylvatica) tend to be easier than Japanese beech (Fagus crenata) in their care. It responds readily to horticultural techniques thanks to their vigor. They can bud back with relative ease as long as correct timing is chosen in applying various techniques. A tall, quiet and elegant tree with striking spring and autumn coloration. It is most appreciated it in winter with its delicate, airy character and light gray bark. 

Tree stands 32" high from soil level. Container is by Yamafusa, Japan.  

Please click on the image to enlarge and obtain further information about this tree.

10. Silver Birch

This birch was acquired in 2020 from Eric Schrader, a well known bonsai professional in the Bay Area. Eric started this tree from a young seedling. It was then field grown for several years and later further developed in containers. The tree was built with an interesting branch structure with and up and down movement to the branches making the design more interesting and less predictable. They are notorious for branch dieback and so timing of pruning, watering and light exposure need to be carefully considered. They are highly prized for their smooth white bark contrasting with highly textured areas such as seen in this specimen.  

This birch stands 25" tall from soil level. Container is Japanese, unknown artist.

Please click on the image to enlarge and obtain further information about this tree.

11. Japanese beech 

This Japanese beech was originally a single trunk tree grown for many years by Julian Adams and was purchased in 2017.

This tree stands 26" from the bottom of the stone. Planted on a Japanese Ibigawa stone. 

Please click on the image to enlarge and obtain further information about this tree.

12. Zelkova Serrata

This zelkova shohin originally imported from Japan, is designed in the traditional formal broom style. I continue to develop its nebari and further increase the density of its ramification.

This tree stands 7" from soil level. Container is Japanese by Aiba Koyo. 

Please click on the image to enlarge and obtain further information about this tree.

13. Yatsubusa Elm

This Yatsubusa elm (Ulmus parvifolia 'Yatsubusa') was acquired in May 2017 directly from Ryan Neil at Mirai. A very old tree that had been grown for propagation purposes for many decades in the Wyllamette Valley, Oregon. After the land was sold to a developer, Ryan stepped in and purchased some of these old trees with the intent of making them into bonsai. One of its most striking features is the incredibly fissured bark. Along with it, the tiny dark green leaves impart a very believable scale to the image it presents. 

This tree stands 7" from soil level. It is paired with a Housyu container.

Please click on the image to enlarge and obtain further information about this tree.

bottom of page